No Products in the Cart
Just switch the mode of Geoid CS600 sensor between cadence or speed by re-installing the battery.(Upgrade seal film: slot and contact optimization)
Geoid CS600 sensor can be connected to ANT+ cycling computer smart watch and app, while recording multiple copies of data and facilitate analysis
Geoid CS600 cadence speed sensor is compatible with most Bluetooth or ant+ standard protocol APPs or devices that support third-party brand connections, such as Onelap, Zwift, Rouvy, Peloton, Openrider, Cyclemeter, RidewithGPS, TrainerRoad, and Wahoo Fitness (But WAHOO APP can’t tracking 2 data in the same time even you have 2 sensors.)
Geoid CS600 sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up.
Dual protocol, compatible with ANT+ Bluetooth protocol. Ant+: Garmin sports watches +head units (bike computer) bryton igpsport zwift onelap bkool tacx & virtual cycling trainng software. Bluetooth: endomondo nike+ wahoo fitness strava runtasticpro moofit sports tracker runkeeper suunto bluetooth sports watches
[Note]
1 sensor can ONLY select one mode (Speed or Cadence) at the one time. So you need 2 sensors to test both speed and cadence. (1 for speed,1 for cadence)
Each CS600 sensor can process either speed or cadence but not both at the same time.
When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid.
Our sensor is a geomagnetic sensor, not suitable for spinning bike
Name |
Speed & Cadence Dual Mode Sensor |
Endurance |
500 hours |
Waterproof |
IP66 |
Temperature |
-10-50℃ |
Cadence Range |
30~180rpm |
Speed Range |
5-85km/h |
Battery Type |
CR2032,V |
Weight |
8.8g |
Sensor Dimensions |
38.3*29.8*8.9mm |
Wireless Protocol |
ANT+ & Bluetooth |